How to Set Your Garage Labor Rate: A Simple Method

How to calculate an hourly labor rate for a garage: billable hours, the costs they must cover, the break-even rate, adding profit and fixed-price jobs.

Fatih Bilgiç · · 7 min read

Ask a workshop owner how the hourly labor rate was set and a common answer is: “I looked at what the others charge and went a little lower.” That is a price, but it is not a calculation. The garage down the road has a different rent, different wages and possibly no idea whether it earns money either. This guide shows a simple way to work out your own rate from your own figures: how many hours you can really sell, what those hours have to pay for, where the break-even rate is and how to add profit on top. All amounts in the examples are invented to show the arithmetic; put your own numbers in.

Why copying the neighbor’s rate fails

A labor rate has one job: the hours you sell in a year must pay for the whole workshop and leave something over. Whether a rate is “high” or “low” says nothing about that. Two workshops can charge the same hourly rate and one of them loses money on every job, because it sells fewer hours or carries higher costs.

The market still matters. It tells you what customers are used to seeing. But it comes second: first you need to know the rate below which you are working for free.

Step 1: Count the hours you can actually sell

A technician who is at work for eight hours does not produce eight invoiced hours. Cars have to be moved, parts are late, a diagnosis takes longer than the customer will pay for, somebody has to answer the phone. The hours on your invoices are always fewer than the hours on the timesheet.

Work it out in two steps:

  • Attended hours: technicians × hours per week × working weeks per year. Take out holidays, public holidays and an allowance for sick days.
  • Billable hours: the part of the attended hours that ends up on an invoice. Measure this from your own job cards over a few months; do not take a figure from someone else.

Example: two technicians, 40 hours a week, 46 working weeks. That is 2 × 40 × 46 = 3,680 attended hours. If your records show that about 70 percent of the time is invoiced, you have 3,680 × 0.70 = 2,576 billable hours a year. The 70 percent is only an assumption for this example.

Step 2: Add up what those hours must pay for

Take a full year so that annual bills are not forgotten. In this guide we treat parts separately: parts earn their own profit through the markup, and you can still count that profit in later. A cautious first calculation lets labor carry the whole workshop.

Cost groupWhat belongs in it
StaffWages of technicians and front desk, including everything the employer pays on top.
Your own payWhat you would have to pay someone to do your job. An owner who works for nothing hides a loss.
PremisesRent, electricity, heating, water, waste disposal.
EquipmentTools, lift inspections, diagnostic subscriptions, repairs, and money set aside for replacements.
Running the businessInsurance, accountant, software, phone, bank charges, workwear, consumables you do not invoice.

Example: all of this adds up to 180,000 a year. The currency does not matter for the method.

Step 3: Find the break-even rate

Divide the yearly costs by the billable hours:

180,000 ÷ 2,576 = 69.88 per hour.

That is the rate, before tax, at which the workshop neither earns nor loses money in this example. Every hour sold for less is subsidized by you. Notice how sensitive the figure is to billable hours: if only 60 percent of the time is invoiced, the hours fall to 2,208 and the break-even rate rises to 81.52. Unsold time is expensive.

Step 4: Add profit

Break-even is not a goal. A workshop needs profit to survive a slow month, replace a lift and grow. Decide what share of every labor sale should remain as profit and divide, do not multiply:

Rate = break-even rate ÷ (1 − profit share). With a target of 15 percent: 69.88 ÷ 0.85 = 82.21 per hour.

Adding 15 percent on top (69.88 × 1.15 = 80.36) gives a lower rate and a profit of only about 13 percent of the selling price. The difference between the two calculations is the difference between markup and margin; we explain it in our guide on parts markup and margin.

Tax comes on top of this rate. Whether you show prices with or without tax to private customers depends on the rules and habits of your country; the calculation is always done without tax.

Step 5: Turn the rate into fixed prices

Customers rarely ask for your hourly rate. They ask what an oil service or a set of front pads costs. Fixed prices for common jobs are simply your rate multiplied by a realistic time, plus the parts:

  • Write down how long the job takes on a normal day, not on your best day.
  • Multiply by your hourly rate.
  • Add the parts at their selling price.
  • Check the result against what you charged for the last ten jobs of this kind.

In Baktam, jobs you do often can be saved as service packages with their labor and parts, so the same job is quoted at the same price by everyone at the counter. On a job card, labor and parts are separate lines, which is what makes the next step possible.

Step 6: Check the rate against your own records

A calculated rate is a plan. Whether it works shows in the records after a few months. Three figures are worth looking at regularly:

  • Hours and labor sold per technician. The technician report shows completed jobs, time worked, average job time and the labor amount for the period you choose.
  • Profit per job. The cost and profit report compares selling price with cost, so you can see which kinds of work pay and which do not. Only the owner sees this report.
  • Billable share. Compare labor hours sold with hours attended. If the share is lower than you assumed, the rate is too low or the day is badly organized.

The reports and what they contain are described on the garage reports page. Repeat the calculation once a year and whenever a big cost changes: a rent increase, a new employee, a pay rise.

Common mistakes

  • Dividing by attended hours. It gives a comfortable low rate that cannot cover the costs.
  • Leaving out your own pay. Then the “profit” at the end of the year is just your unpaid salary.
  • Giving away diagnosis. Finding the fault is skilled work. Put it on the quote as its own line.
  • Hiding a low labor rate behind parts. It works until a customer brings their own parts.
  • Never revisiting the rate. Costs rise every year; a rate set three years ago is a discount today.
  • Discounts on the spot. Ten percent off the invoice can be most of the profit on that job.

A rate you have calculated is easier to defend, to yourself and to the customer. To see how job cards, labor lines and reports work together, visit our garage management software page.