Vehicle Check-In Form: What to Record and Photograph
What a vehicle check-in form should contain, how to photograph existing damage, which terms the customer signs and how self check-in by QR code works.
Fatih Bilgiç · · 7 min read
“That scratch was not there when I brought it in.” Every workshop has heard it, and without a record there are only two bad answers: pay for a repair you did not cause, or lose the customer. A vehicle check-in form with a few photos takes about two minutes and settles the question before it is asked. This guide covers what to write down when a car arrives, how to photograph existing damage so the pictures are actually useful, which terms the customer should sign, and how to let customers check in on their own phone.
Why the first two minutes matter
Most arguments at handover are not about the repair. They are about things nobody recorded at the start: the condition of the bodywork, the fuel level, the mileage, a pair of sunglasses in the door pocket, or what the customer was told about storage and warranty. Once the car has spent three days in a busy yard, nobody can prove anything.
A check-in record does three jobs at once:
- It protects the workshop against claims for damage that was already there.
- It protects the customer, who can see that their car and belongings were noted properly.
- It helps the technician, who reads the complaint in the customer’s words instead of a second-hand summary.
What to record at check-in
| Field | What to write |
|---|---|
| Customer and vehicle | Name, phone number, plate, make and model. Check the phone number out loud; it is how you will reach them. |
| Mileage | The exact reading from the dashboard, not a round number. |
| Fuel level | Quarter, half, three quarters, full. It matters after a long test drive. |
| Complaint | In the customer’s words: when it happens, at what speed, hot or cold, since when. |
| Existing damage | Scratches, dents, cracked lights, curbed wheels, a chipped windshield, with a photo of each. |
| Belongings left in the car | Anything of value, or a note that the customer was asked to take everything with them. |
| Warning lights | Which lights are on when the car arrives. A photo of the dashboard covers this and the mileage together. |
The check-in form is the first page of the job. How the rest of the document is built is explained in our guide on how to write a job card.
Damage photos that are actually useful
A photo only helps if it shows where on the car the damage is and that it was taken at check-in. Ten random close-ups of gray paint prove very little. A fixed routine is faster and better:
- Walk around the car once, always in the same direction. Start at the front left corner and finish where you started.
- Take four corner shots. Each one shows two sides of the car and the plate in at least two of them.
- Add a close-up of every mark you see, then one step back so the panel is recognizable.
- Photograph the dashboard with the ignition on: mileage, fuel and warning lights in one picture.
- Do not forget wheels and glass. Curbed alloys and windshield chips are easy to overlook and just as easy to argue about later.
Take the photos with the customer standing next to you whenever you can. Pointing at a dent together and saying “I am noting this one” is worth more than any clause in your terms. If the car is dirty or wet, write that down: fine scratches cannot be seen under road dirt, and the note explains why they are not on the form.
Keep the photos with the job, not in a technician’s private phone gallery. In Baktam the photos, damage notes, mileage, fuel level and belongings are saved on the job card at check-in. A body shop can also mark existing damage on a body diagram that the customer signs.
Terms and signature
The second half of a check-in form is the part the customer agrees to. Keep it short and concrete. Clauses that prevent the usual disputes:
- Condition on arrival: the car was received with the mileage, fuel level and condition shown on the form and in the photos.
- Extra work: anything beyond the agreed job is approved separately before it is done.
- Storage: how many days the car can stay free of charge after you report it ready, and the daily fee after that.
- Labor warranty: for how many months you guarantee your work.
- Payment before handover and what applies to parts the customer supplied.
You write these once. In Baktam you enter the free storage days, the daily storage fee and the labor warranty in months in the settings, and the clauses appear on every check-in form with their numbers. The customer reads them and signs with a finger on a tablet at the counter or on their own phone; you can also print the form on A4 and take a signature on paper. The signature, the signer’s name, the time and the accepted text are stored with the job. The details are on the check-in form and digital signature page.
Two honest limits: a signature taken this way is a documented record, not a qualified electronic signature, and ready-made clauses are a starting point. Have a lawyer check your terms against the consumer rules of your country before you rely on them.
Letting customers check in themselves
On a Monday morning four cars arrive at once and the careful walk-around is the first thing to be skipped. One way to keep the record without a queue is to let the customer do the typing.
With QR check-in you put a poster with a QR code at the door or on the counter. The customer scans it with the phone camera, enters the plate, phone number and complaint, adds photos if they like and signs your check-in terms with a finger. The record arrives in a list of incoming check-ins. Nothing becomes a job by itself: you review each record and turn it into a job card or reject it. More on the QR check-in page.
Self check-in does not replace your own walk-around. Customers photograph what they want you to fix, not the dent on the other side. Take your corner shots anyway.
Closing the loop at handover
The check-in record earns its keep at handover. Go through it in the same order: mileage, fuel, the marks you noted, the belongings. Then show what was done. A handover printout that lists the work, the parts and the amounts, with a signature line for the workshop and one for the customer, closes the job cleanly. If someone other than the owner collects the car, write down who.
Common mistakes
- “We know him, no need.” Regular customers are the ones you least want to argue with. Use the same routine for everyone.
- Photos without context. A close-up with no wider shot cannot be matched to a panel later.
- A round mileage. “About 90,000” is useless when the next service interval is discussed.
- Terms that are mentioned but never shown. A storage fee the customer first hears about after three weeks will not be paid without a fight.
- Photos kept on a private phone. When that technician is off sick, the evidence is too.
Check-in, quote, repair and handover work best as one record. Our job card software page shows how the form, the photos and the signature stay attached to the job from the first minute to the last.